SEC-E9 Key Cutting Machine Reviews: Function+Key List+Test

How to Cut 2018 VW/ Audi HU162T keys by S EC-E9 Key Cutting Machine . Procedures: Prepare the key and cylinder for new VW HU162T (9) Press “Search” button in the main interface Select “Key blank”-> Input “HU162T” Press “Search”-> Select “SILCA-HU162 (9) Come to the basic data page for HU162T Firstly decode side A of original key Fix the side A of original key on#1 car key clamp Confirm it’s side A, and then press “Decode” Decoding side A Side A is decoded successfully Press the key image to decode side B of the original key Note: There is a small groove on side B Fix side B on HU162T clamp, and tighten the screw Install HU162T onto #1 car key clamp Press “Decode” button to enter decoding page Select the most right blue icon as sense key location and check “Round off” Decoding side B Complete decoding side B Remove HU162T clamp and put a new key blank for copy Select side A, and press “Cut” button to enter cu

How to Cut HU66 key by using HU66 auxiliary clamp on SEC-E9 key cutting machine . Procedures: Go to SEC-E9 menu Press “Search” button Select “SILCA” to enter key data Use the original key to open cylinder Test OK Use the stopper to help you fix the original key in the correct position Press “Decode” button to start decoding original key and get the key number Get the key number successfully Put the key into the HU66 auxiliary fixture and tighten Select “Cut”-> “1 st  Cut” to start cutting a new key Note: Please remember to close the safe gate It takes about 2 minutes to cutting the key Cutting is done! Open the safe gate to clean the clamp & the new key Take out the new key Fix the other side of the new key blank Press “2 nd  cut” button to start cutting another side key Cutting is complete Test the new key, can work very well!